NBR/PA

瀏覽量：

1000

NBR/PA66合金是以丁腈膠為主體，用PA66（尼龍66）做改性劑，用機械共混的方法生產的改性橡膠，其突出的特點就是即耐油又耐低溫。可用橡膠通用的工藝設備、材料和技術，生產各種橡膠制品。

所屬分類：

橡塑合金類

聯系我們

產品介紹

NBR/PA66合金是以丁腈膠為主體，用PA66（尼龍66）做改性劑，用機械共混的方法生產的改性橡膠，其突出的特點就是即耐油又耐低溫。可用橡膠通用的工藝設備、材料和技術，生產各種橡膠制品。

丁腈膠有多種牌號，各種牌號的性能不同，通常用丁腈膠的丙烯腈含量不同來區分，就丁腈膠的耐油性能來說，隨著丙烯腈含量的增加而變好，但低溫性能則變差。丁腈18的脆性溫度是-50℃；丁腈40的脆性溫度是-23℃。橡膠最寶貴的就是低溫彈性，丁腈18的低溫彈性好但耐油性能不好。人們一直在設法解決這個問題，但效果不明顯。用尼龍66樹脂改性丁腈18，即保留了丁腈膠的低溫性能又將其耐油性能提高。

NBR/PA66合金由于尼龍的抗滲透性，可否用在貯油、輸送橡膠制品。飛機軟油箱、加油管、空調膠管上。尼龍低摩擦系數等特點，可否用在旋轉密封件上減少唇部的摩擦生熱而增加壽命。

NBR40/PA66合金，比丁腈40的耐油性能更好，可用在采油工業設備的密封件上，提高使用壽命，增加可靠性。尼龍的耐油性、抗滲透性可改善共混后材料這方面的性能，可否在油井封隔器上應用減少低分子滲透產生的鼓包。

尼龍的抗滲透性，減少了輸送介質的擴散，特別適合用航天、航空器的橡膠制品上，如自動調節系統的膜片、密封件、高壓油管等。

NBR / PA66 alloy is a modified rubber produced by mechanical blending with nitrile rubber as the main body and PA66 (nylon 66) as modifier. Its outstanding characteristics are oil resistance and low temperature resistance. All kinds of rubber products can be produced with general rubber process equipment, materials and technology.

There are many grades of nitrile rubber. The properties of various grades are different. It is usually distinguished by the different acrylonitrile content of nitrile rubber. As for the oil resistance of nitrile rubber, it becomes better with the increase of acrylonitrile content, but the low-temperature performance becomes worse. The brittleness temperature of nitrile 18 is - 50 ℃; The brittleness temperature of nitrile 40 is - 23 ℃. The most valuable thing of rubber is low-temperature elasticity. Nitrile 18 has good low-temperature elasticity but poor oil resistance. People have been trying to solve this problem, but the effect is not obvious. Nitrile 18 was modified with nylon 66 resin, which not only retained the low temperature performance of nitrile rubber, but also improved its oil resistance.

Due to the impermeability of nylon, NBR / PA66 alloy can be used in oil storage and transportation of rubber products. On aircraft soft fuel tank, refueling pipe and air conditioning hose. Nylon has the characteristics of low friction coefficient. Can it be used on rotary seals to reduce friction heat generation at the lip and increase service life.

NBR40 / PA66 alloy has better oil resistance than nitrile 40. It can be used in seals of oil production industrial equipment to improve service life and reliability. The oil resistance and permeability resistance of nylon can improve the performance of the blended material. Can it be used in oil well packer to reduce the bulge caused by low molecular permeability.

The impermeability of nylon reduces the diffusion of conveying medium. It is especially suitable for rubber products of aerospace and aircraft, such as diaphragm, seal and high-pressure oil pipe of automatic regulation system.